LCD-200 Bill of Materials

The LCD-200 is composed of the following main components.

Main Components

Description Vendor Part # Quantity
LCD-200 Bare Printed Circuit Board ShumaTech 99-0017 1
LCD-200 Overlay ShumaTech 99-0016 1
128x64 LCD SparkFun LCD-00710 1

 

A number of electronic components are necessary to complete the LCD-200 PCB and these are listed below.  The SD memory card reader is optional and those components may be omitted if desired.

Electronic Components

Description Vendor Part # Quantity
20 pin MDF7 header Mouser 798-MDF720S254DSA55 1
3.3V regulator Mouser 511-L4931CZ33-AP 1
10K trimmer resistor Mouser 652-3362W-1-103LF 1
PNP transistor Mouser 512-2N4403TA 1
Plastic case Mouser 546-1591XXBBK 1
10uF ceramic capacitor Mouser 810-FK14X5R1A106K 3
3.3V zener diode Mouser 78-1N4728A 1
SD card reverse Mouser 581-145638109211859+ 1
Tact switch 12.5mm Mouser 612-TL1105D 4
560 ohm resistor Mouser 291-560-RC 1
1K ohm resistor Mouser 291-1K-RC 1
10K ohm resistor Mouser 291-10K-RC 1
Red LED 3mm Mouser LTL-1CHE 1
2X10 20P Header 0.100 0.230 Mouser 649-67997-420HLF 2
2X5 10P Header 0.100 0.230 Mouser 649-67997-410HLF 4
1X20 20P Header 0.100 0.318 Mouser 649-78511-236HLF 1

 

The following components are necessary to complete the LCD-200 encoslure. 

Enclosure/Mounting Components

Description Vendor Part # Quantity
IDC Ribbon Cable 2x5 10P Digi-Key M3AAA-1006J-ND 2
IDC Ribbon Cable 2x10 20P Digi-Key M3AAA-2006J-ND 1
Flat head screw, 4-40 x 3/8" black ox MicroFasteners FMPPK0406 4
Pan head screw, 2-56 x 1/8" MicroFasteners MSPPS0202 6
Pan head screw, 4-40 x 1/4" MicroFasteners MSPPK0404 4
Pan head screw, 4-40 x 3/8" MicroFasteners MSPP0406 2
Hex nut, #4 MicroFasteners HN0440 2
Flat washer, #4 MicroFasteners FW04 6
Standoff round 4-40 threaded 3/8" Mouser 534-2026 4
Standoff round 2-56 threaded 3/16" Mouser 534-1801A 4